|
Voltage :220-240VAC / 50-60Hz
|
||||
|
Fuel tank volume：1.2L
|
||||
|
Power ：3000W
|
||||
|
LED quantity：4 colors (Red, Green, Blue, White)
|
||||
|
LED color ：48x 3W 3-in-1
|
||||
|
DMX channel：8
|
||||
|
Control method ：DMX, LCD display, remote control, DMX self-propelled mode
|
||||
|
Packing size ：68*45*46.5cm/26.77*17.71*18.30in
|
||||
|
Weight ：23.7KG/52.24LB
|
||||
|
Steps To Use:
|
||||
|
Step 1:
First place the equipment on a flat ground, and leave at least 50 cm of space around the equipment machine. |
||||
|
Step 2:
Pour bubble oil and mist oil into the corresponding marked boxes. Remember not to put them in different boxes by mistake.
|
||||
|
Step 3:
Plug the machine's power cord into the corresponding socket and turn on the machine. Turn the power switch to the pointed"ON" position and see what appears on the LCD display.
|
||||
|
Step 4:
"Preheating" will light up on the display, and after a few minutes the screen will show "Ready" to indicate that heating is complete.
|
||||
|
Step 5:
Use the control panel. Set the device to the desired operating mode by operating the touch screen.
|
||||
|
Step 6:
When finished using, turn off the device. Press the power switch to the "OFF" position and unplug the power cord from the outlet.
|
||||
|
Step 7:
If the equipment needs to be transported, the tank needs to be emptied through the connecting pipe and drain valve before transportation.
|
 |
24 PCS RGB ，3IN1 LEDS: Offers a variety of light sources for both smoke and bubbles. |
| FOURHIGH-SPEED SILENT FANS： Propel bubbles to a height of 3-5m for efficient field coverage. |
 |
 |
DESIGN WITH FOUR-WAY BUBBLE OUTLETS: Simultaneously sprays bubbles from four nozzles,ensuring quick and effective dispersion. |
| DESIGN OF SEPARATE OIL TANKS: Enhances ease of filling and cleaning while minimizing liquid loss. |
 |
| Smoke Bubble Machine FAQ： |
| 1.If the machine's ventilation is closed, can bubbles still emerge from the ventilation? |
| Answer: Yes, they can still spray out, but the bubbles won't reach the same height as when the ventilation is open. |
| 2. If the air outlet is adjusted upward, can the bubbles reach a higher height? |
| Answer: Yes, adjusting the outlet upward will make the air blow upward, causing the bubbles to spray higher. |
| 3. Does the product's LED light have a gradient effect? |
| Answer: Yes, it does. |
| 4. How should the oil pump and nozzle be maintained? |
| Answer: After using bubble oil, spray clean water until the remaining bubble oil is expelled. No special treatment is needed for smoke oil. |
| 5. How many hours can a 1.2L bucket of oil last? |
| Answer: Using the maximum smoke output, it lasts approximately 2 hours. At 15% smoke output, it can last around 6 hours. |
| 6. Is the ratio of oil consumption between bubble oil and smoke oil 2:1? |
| Answer: Yes, that's the correct ratio. Bubble oil tends to be used up faster. |
| 7. After using the oil, should it be poured out? How should it be cleaned and maintained? |
| Answer: No need to pour it out. Just filter the bubble oil pump with clean water until residual oil is expelled. Just wipe the front of the machine clean with a towel. |
| 8. In which places or scenarios are these smoke machines mainly suitable? |
| Answer: They are primarily suitable for bars, wedding halls, general event performances, birthday parties, live broadcasts, etc. |
| 9. After use, the ground may have oil. What should be done? how much oil should be prepared? How long does an event last |
| Answer: The oil on the floor only needs to be mopped clean with clean water; prepare 2 barrels of bubble oil and 1 barrel of smoke oil for one event; fill the oil bottle that comes with the machine, which is enough for one event, The approximate usage time for an event is about an hour, with each spray lasting about five minutes. |
